14
/
19
12.
MAINTANCE AND CLEANING
Implement the following periodical maintenance so that the product should work in safe and long life
DAILY MAINTANCE
When the water in washing tank gets dirty, it must be replaced by fresh water. For thi
s purpose, bring the “0
-
1” switch
of the machine into “0” position and close the device.
Switch off the electricity, switching off the switch.
Opening the cover of the device, sponge the solid wastes in the device
CLEANING THE DEVICE
When the water in washing tank gets dirty, it must be replaced by fresh water.
For this propose, bring the STAND BY and START swatches of the machine into “stop” and close the device.
Closing the switch, switch the electricity off.
After opening the cover, be careful of not impacting the cover holder.
Take out the overflow pipe.
Remove the washing and rinsing buttery nozzles and clean them. Wash the rinsing nozzles and rinse them.
Taking out the surface filters and pump suction filters, clean them by brush under the flowing water.
Fix all parts in their place in such a way conforming to their original conditions.
Close the cover of the device.
Open the relevant switch on the control panel supplying electric to the device. Bring the “STAND BY and “START”
switchs into starting position.
For complete cleaning of the device, run the device for 5 minutes
Bring the “START” switch into” pause” position.
Open the cover.
WEEKLY MAINTANCE
When the water in washing tank gets dirty, it must be replaced by fresh water.
For this propose, bring the STAND BY and START swatches of the machine into “stop” and close the device.
Closing the switch, switch the electricity off.
After opening the cover, be careful of not impacting the cover holder.
Take out the overflow pipe.
Remove the washing and rinsing buttery nozzles and clean them. Wash the rinsing nozzles and rinse them.
Taking out the surface filters and pump suction filters, clean them by brush under the flowing water.
Fix all parts in their place in such a way conforming to their original conditions.
Close the cover of the device.
Open the relevant switch on the control panel supplying electric to the device. Bring the “STAND BY and “START”
switchs into starting position.
For complete cleaning of the device, run the device for 5 minutes
Bring the “START” switch into” pause” position.
Open the cover.
