16
/
19
• Check whether water temperature in washing tank is correct or not.
• There is no drying: (
Models with drying system)
• Be sure that the amount of polisher injected to the machine is correct
• Check the thermostat of rinsing water is set to 80 ºC.
• Condensation in the glasses.
• Do not store the glasses on a flat surface.
• The amount of
dosed polisher is not correct.
• The amount of dosed polisher is not correct.
• Striped glasses:
• Use only foamless detergent.
• There is excess amount of foam in washing tank:
• Water temperature in washing tank must not be lower than 50ºC.
• Check t
he detergent and polisher dosing apparatus. There cam be excessive dosing
• Be sure that machine was mot cleaned by foamed detergent. Empty the tank and boiler.
• If foamed detergent was used, empty the tank and be filled it by fresh water. Continue to
make this operation until the foam
disappear.
• There is stain on the glass :
• Decrease the amount of dosed polisher. Acceptable dosage is 0,1 cc / liter water.
• The arms of washing buttery are not correctly rotating.
• Remove the washing arm and clean it.
• Be sure that water pressure is more than 202 kpa, If the pressure is lower, mount a pressurizing
pump.
