ADEMCO VISTA 10, Engineer'S Manual

Page: 20 / 28

20
Communication
Ö
/# 20 Allow arming with 0 = No
telephone line fault 1 = Yes
Ö
/# 22 Telephone Line Monitor 0 = No
Active 1 = Yes
Ö
/# 30 Dialling Method: 0 = Pulse
Pulse / DTMF 1 = DTMF
Ö
/# 31 PABX Access Code
Note: The Vista 10 cannot be guaranteed to work
with PABX exchanges.
Ö
/# 33 Primary Central Station
Telephone Number
Ö
/# 34 Secondary Central Station
Telephone Number
Ö
/# 32 Primary Account
Number
Ö
/# 90 Secondary Account
Number
Ö
/# 46 Digicom Format 0 = Ademco Contact ID
1 = High Speed (8 channel)
Ö
/# 49 Checksum Verification 0 = No
1 = Yes (only used on
ADEMCO receivers)
Before entering new numbers type
Ö
33
Ö
(primary)
or
Ö
34
Ö
(secondary) to delete previous number. If
number is less than 16 digits press
Ö
to finish entry.
(0)
(1 5) (1 5) (1 5) (1 5)
(1)
(0)
(1)
(0)
Before entering number type
Ö
31
Ö
to delete previous
number. Enter as 2 digit num-
bers e.g. 9 = 09. If using less
than 8 digits press
Ö
to finish.
If set to 1, the user must en-
ter code + 00
before setting the system
with the normal procedure.
(1 5) (1 5) (1 5) (1 5)
(1 5) (1 5) (1 5) (1 5)
www.PDF-Zoo.com
firealarmresources.com