29
If You Have Trouble with Your
Regular Telephone Service
In the event of trouble with your regular
telephone service, disconnect the security
system from the telephone line by
removing the plug from the RJ31X (CA38A
in Canada) telephone wall jack (you should
have been shown how to do this by your
installing company).
DO NOT ATTEMPT
TO REMOVE THE TELEPHONE LINE
CONNECTION IN THE CONTROL
CABINET OR AT THE PHONE
MODULE – THIS WILL CAUSE
COMPLETE DISRUPTION OF
REGULAR TELEPHONE SERVICE.
If the regular phone service works
correctly after the plug has been
disconnected from the RJ31X wall jack, the
security system has a problem and you
should call your installing company for
service immediately. If, upon
disconnection of the security system from
the RJ31X wall phone jack, there is still a
problem with telephone service, notify the
telephone company that they have a
problem and request prompt repair
service.
Important:
If the phone service is at fault in this test,
re-insert the plug immediately; if the
security system is at fault, re-insert the
plug as soon as the security system is
repaired. Remember that the security
system relies on this connection for
communication with your alarm
monitoring station.
The user may not under any circumstances
(in or out of warranty) attempt any service
or repairs to the security system.
Summary of Contents for 4286 - Ademco Phone Module
Page 2: ...i...
