ADE VITALIS Series, Operating Manual

Page: 4 / 20

Electrical safety precautions
The vegetable cutter is equipped with various sensors for the operator's safety:
- Retaining device: Stops the machine when the retaining device is folded up and enables automatic
restart when the retaining device is pushed down:
- Lid: Stops the machine when the lid is removed, for example, for the disc change. Voluntary power-
on
by pressing the “I” start button is only possible when the lid is replaced and is locked by the screw
cap.
- Housing connected to the collecting pot or ejection chute: Stops and prevents start-up of the machine
if the collecting pot or ejection chute is not properly positioned.
Voluntary power-on by pressing the
“I” start button is only possible when the collecting pot or chute with the magnetic sensor are positioned
correctly inwards to the device.
The vegetable cutter is equipped with the N.V.R. device that allows the machine to be turned on by only
pressing the “I” start button in the event of power recovery after a power outage.
Residual risks
The vegetable cutter is provided with the standards for the electrical and mechanical safety devices.
Nevertheless, this operating manual describes the residual risks that cannot be completely ruled out. The
hazards of the respective situations are explained in detail below.
INTENDED USE
The vegetable cutter is a device that is designed and constructed to cut and slice many kinds of vegetables,
fruits, potatoes, etc. intended for human consumption. The vegetable cutter must not be used for frozen
products, meat or fish with bones.
It is a professional device that can be used in commercial premises (restaurants, commercial kitchens, pizza
restaurants, bars, etc.).
Any use that is not intended by the manufacturer should be considered as “IMPROPER”.
The manufacturer assumes no liability for damage caused by improper use of the device, failure
to comply with the information in this operating manual, as well as manipulation or
modifications of the device without its formal approval.
BEFORE FIRST USE
Unpacking the device
Upon receipt of the device, check the integrity of all components. If any parts are damaged or missing, please
contact immediately the dealer from whom you purchased the device to discuss further steps.
•
Open the box and remove the machine.
•
Check the package contents and check that it matches the specifications on the delivery note.
Packaging materials are valuable materials and must not be disposed of in household waste.
Check with your local authorities for proper disposal options. Local regulations must be
followed during disposal. Never dispose of packaging materials in nature!