IRIS-4 Technical Reference Manual.docx 12/01/2023
page 7
1
About this manual
This Technical Reference manual applies to the complete range of IRIS-4 models, see chapter 2 “About IRIS-4
product range”.
1.1
Target group
This document is intended as a technical reference for engineers and for anybody that needs technical
information about the IRIS-4 range of terminals.
1.2
Scope
This document has all the technical information about the iRIS-4 range of terminals running software version
4.15.0. Information about connecting to proprietary terminals is in the separate documents.
The manual has these chapters:
1
About this manual
Describes the range and scope of the manual.
2
About the IRIS-4 product range
Presents the terminals in the IRIS-4 range.
3
Circuit board layouts
Presents the Printed Circuit Boards (PCB) for each terminal.
4
Basic Setup
Explains how to install the terminals.
5
Configuring the terminal
Explains how to configure the terminals for their purpose.
6
Settings
Explains how to configure all the settings.
7
Installation for EN54-21:2006
Compliance
Installation instructions for complying with this standard.
8
Installation for VdS 2463
Compliance
Installation instructions for complying with this standard.
9
Trouble reporting and test
Explains how the terminal reports problems and how to test an
installation.
10 Maintenance
Explains maintenance procedures.
11 Technical Specifications
Lists all the technical specifications for the products.
12 Conformance
Lists the standards to which the products conform.
A1 Setting up the IRIS Toolbox
Explains how to install the IRIS Toolbox.
A2 Abbreviations used
Lists and explains all abbreviations used in the document.
