IRIS-4 Technical Reference Manual.docx 12/01/2023
page 45
6.20
Default
If at any point a default of the terminal is required, use these options.
To reset the terminal to manufacturing defaults, click «Default All» and confirm
that the terminal is to be defaulted.
To only reset the security key used by the ARC, click «Default Key». Then
request the ARC to re-synchronize which will create a new key.
For terminals with an AP button (this is not part of Settings menu)
1
Power down the terminal.
2
Press and hold down the AP button.
3
Re-apply power while still holding down the AP button for another 10 seconds. This resets the
terminal to manufacturing defaults.
6.21
Build information
Displays the product name, the IRIS-4 software version and the cellular module
version.
Click on various items to see the information.
6.22
Reflash
This menu controls the reprogramming of the terminal to the latest software.
To enter this menu, you must enter the reflash password. By default, this is
‘111111’ and in this case it must be changed, to comply with EN50136-2.
Note: If required, the ARC can run a reflash remotely.
Reflash Access Password
To change your password, follow this procedure:
1
Enter your new password.
If you need to redo your typing, click «Clear» and start again. When
you are done, click «Save».
2
Confirm your password and click «Save». This will return you to the
“Reflash Settings” screen.
Reflash IP address
The default reflash IP address is 195.59.117.164 and links to the AddSecure reflash server. This server is
available 24/7 and is kept constantly up to date with the latest software.