a. Select .
b. The deletion process is dynamically displayed in the two sides of reading area and status area.
c. After all files are deleted, the screen returns to the file menu.
The operation steps:
a. Connect ADT672 and computer via RS232 cable, start up the receiving software and set the correct baud rate.
b. Select .
c. The sending process is dynamically displayed in the two sides of reading area and status area.
d. After all files are sent, it returns to the file menu automatically.
The operation steps:
a. Please select .
b. The screen displays two options figure 3-1-7-1.
c. If select manual mode (HAND), screen returns to the file menu.
Under the manual mode, one record will be saved by pressing once.
d. If select automatic mode (AUTO), screen returns to the setup
menu with logging mode (see figure 3-1-7-2).
Remark: The next operation after all the files are deleted will start from the very beginning of file number 1."
Remark: Please refer sending data format in the appendix II: communication protocol.
3.1.6 Send all files via serial port
3.1.7 Set save mode
Figure 3-1-7-1: Select save mode
Figure 3-1-7-2: Setup menu of save mode
hour
interval
mode
hand
automatic
30
