Additel ADT672 User Manual Download Page 33

Page: 33 / 73

2.7.4 Software

3.0 Basic introduction

◆

3.1 How to operate save menu

Please refer to 9500 Additel/Land introduction for more information. Additel/Land is available for free download at

http://www.additel.com/products/Software/.

30 files, 40 records per file.

Select a file from files (1~30), a record is saved by press

once till the file is full.

including hour record, interval record.

Hour-record: save one record per every hour

Interval-record: the interval can be set up (1 second ~100 hours)

In the record mode, the files are saved according to the set up sequence.

The record mode defaults to the previous setting.

In the record mode, the keypad is locked. By pressing

to quick save and unlock the keypad.

left reading area display the current file number;Right reading area displays the saved records; status area

indicate the % of current saved files.

(1) Enter into save menu.

Method 1: Select the (FILE) in the basic function menu

Method 2: Press button in the main interface.

Data logger function

Memory capacity:

Manual mode:

Record mode:

Save status:

;

Figure 3-0 Saving area

100

file No. capacity% indication saved records

Summary of Contents for ADT672










































































Search results

Summary of Contents for ADT672

Reviews:

Related manuals for ADT672

Brands by name

Popular brands

Additel ADT672, User Manual

Search results

Summary of Contents for ADT672

Reviews:

Related manuals for ADT672

Brands by name

Popular brands