7
INST
ALLA
TION
CONFIGURA
TION
OPERA
TION
FUR
THER
INFORMA
TION
INDEX
MOUNTING
There are three main mounting methods for the transmitter unit:
•
The supplied four self-adhesive rubber feet,
•
The rear mounting slot,
•
Optional rack fascia plate (and rack mount chassis).
Rack fascia plate
The optional fascia plate (plus
screws), allows the transmitter to
be secured within a standard rack
chassis.
Installation
CONNECTIONS
Installation involves linking the ALDV104T transmitter to the host computer; the
(up to) four receivers; a network port and the supplied power adapter.
•
HDMI connections
•
Network connection
•
Receiver connections
•
Power adapter connection
Connections may be made in any order however, where possible, connect the
transmitter to the mains supply as a final step.
Using the rear mounting slot
The slot at the rear of AdderLink DV104T unit allows it to be hung upon a fixed screw
that protrudes from the mounting surface.
5m
m (
)
0.19"
9.5m
m
0.37"
(
)
IMPORTANT: The internal circuit board is accessible through the mounting
slot. Ensure that any mounting screws protrudes no further than ½”
(12.5mm) into the module casing - serious electrical damage will be caused if
the screw makes contact with the internal circuitry.
HT
