manualshive.com logo in svg

ADC RF Worx RDS-2, User Manual, Page: 34 / 45

Share
Download
ADC RF Worx RDS-2 User Manual Download Page 34

ADCP-61-819 • Issue 1 • July 2000

Page 29

© 2000, ADC Telecommunications, Inc.

4.5 Program Operation

4.5.1

Swatch Global Preferences and Port Properties.

The power meter settings, calibration enabling, and return delay values for the Redundant
Amplifier are controlled through two mechanisms:

Global

 Preferences

 establish system wide settings. Some global preferences are used

to force all ports to use global values for certain functions. Global preferences also
provide the values for those ports that individually are configured to use global
preferences even when they have the option to be locally configured.

The 

Unit Properties

 determine the settings for the port(s) of a unit when not

overridden by global enable preferences. These are controlled in the Unit Pane via
either a Properties display or a Status display. The unit and port properties are saved
in the Site Map file, even when not enabled for use.

4.5.2

Scanning and Communication Errors

The S

WATCH

TM 

program scans the system at an interval established in the 

Preferences

 dialog.

During the scanning process the program ensures that each unit is connected to its respective COM
port. If up to ten communication errors are encountered, a yellow icon will appear in the 

Site

Map/Unit List

. If, after ten system scans, a unit does not “respond” it is determined to be off-line

and will appear in red in the 

Site Map/Unit List

. An entry will also be added to the 

Event Log

.

4.5.3

Site Map/Unit List

The 

Site Map

 and 

Unit List

 are a graphical representation of the units in the system.

The 

Site Map

 displays units in a tree format whereby individual units or ports are sub-units of

larger “branches” or nodes. (See 

Figure 28

.)

Summary of Contents for RF Worx RDS-2














































Reviews:

No comments