ADC RF Worx RDS-2, User Manual, Page: 33 / 45

ADCP-61-819 • Issue 1 • July 2000
Page 28
© 2000, ADC Telecommunications, Inc.
Adding a Unit Automatically (Discovery Scan)
Perform the following procedure to automatically add a unit to the program:
Note : RDS-1 units can only be added manually.
1. Use the View – Unit Properties menu command to switch the Unit Pane to the Unit
Properties view ( Figure 21 ).
2. Select Find All Units to initiate a search for RDS-2 model units. The discovery
process will find any new units.
Note : Depending on the Preference settings, as each new unit is found, you may be
prompted to accept the unit before it is added to the program.
4.4.7 Moving a Unit/Port to Another Site
Perform the following procedure to move a unit or individual port to another site in the Site Map .
1. Select the unit or port you wish to move by left clicking on that item in the Unit
List / Site Map . Use the View – Unit Properties menu command to switch the Unit
Pane to the Unit Properties view ( Figure 21 ).
2. Select the Port tab ( Figure 27 ).
3. Click on the Site drop-down menu and select the site to which you would like to
move the unit/port.
4. Click the Update button. The item will appear in the Site Map under its new site.
Figure 27. Moving a Unit/Port to Another Site