ADC MM701G2, User Manual

Page: 110 / 134

Appendix A: Command Line Interface Access April 14, 2006
A-22 MM70xG2-UM-03
View G.shdsl Configuration
You can view G.shdsl current settings from the G.SHDSL Current Settings dialog. See “Complete an Advanced
Configuration” on page A-20 for definitions of these parameters that you previously set.
From the G.SHDSL Menu, enter 1 to display the G.SHDSL Current Setting menu ( Figure A-16 ).
Figure A-16. G.SHDSL Current Setting Menu
2
(cont.)
• Test Bit Rate
Type 8 then select a rate (number 1 through 36) for the test bit rate. This test bit rate is used by the
manufacturer for internal use only.
• SNR Margin Limit
Type 9 then enter a value from -64 to 63. This value indicates the minimum SNR margin (in
decibels) that must exist when the G.shdsl connection is synchronized and in order for the DSL
MAR LED to be lit ON Green. The default value is 6.
3 Type 5 to Apply the new configuration for the G.shdsl settings.
Step Action