ADC MM701G2, User Manual

Page: 104 / 134

Appendix A: Command Line Interface Access April 14, 2006
A-16 MM70xG2-UM-03
2 Enter the session number to display the session screen. ( Figure A-12 below shows session 1, PPPoA-
ROUTED.)
Figure A-12. PPPoA Routed Session
3 Change settings as appropriate. See these sections for detailed information about editing parameters for
these protocols:
• “Set Up an RFC 1483 Bridged Session” on page A-10
• “Set Up an RFC 1483 Routed Session” on page A-11
• “Set Up a PPPoA or PPPoE Routed Session” on page A-13
4 Select Apply new setting to immediately activate the changes that you have made for this session.
5 Select Save Current configuration from the Main Menu as described in “Saving the Current
Configuration” on page A-28 or the changes will be lost upon reboot or power cycle.
Step Action