44
SECTION VI
ROUTINE MAINTENANCE
A. CLEANING
A program and/or schedule
should be
established for periodic inspection, cleaning, and removal of lint
from various areas of the dryer, as well as throughout the duct work system. The frequency of cleaning
can best be determined from experience at each location. Maximum operating efficiency is dependent
upon proper air circulation. The accumulation of lint can restrict this air flow. If the guidelines in this
section are met, an
ADC
dryer will provide many years of efficient, trouble-free, and - most importantly
safe operation.
WARNING
: LINT FROM MOST FABRICS IS HIGHLY COMBUSTIBLE. THE
ACCUMULATION OF LINT CAN CREATE A POTENTIAL FIRE HAZARD.
WARNING
: KEEP DRYER AREA CLEAR AND FREE FROM COMBUSTIBLE
MATERIALS, GASOLINE, and OTHER FLAMMABLE VAPORS and
LIQUIDS.
NOTE
: Suggested time intervals shown are for average usage which is considered six (6) to eight
(8) operational (running) hours per day.
SUGGESTED CLEANING SCHEDULE
EVERY THIRD or FOURTH LOAD
Clean the lint screen every third or fourth load. A clogged lint screen will cause poor dryer
performance. The lint screen is located behind the lint door in the base of the dryer. Open the lint door,
brush the lint off the lint screen, and remove the lint. Inspect lint screen and replace if torn.
NOTE
: The frequency of cleaning the lint screen can best be determined from experience at each
location.
WEEKLY
Clean lint accumulation from lint chamber, thermostat, and microprocessor temperature sensor (sensor
bracket) area.
WARNING
: TO AVOID THE HAZARD OF ELECTRICAL SHOCK, DISCONTINUE
ELECTRICAL SUPPLY TO THE DRYER.
Summary of Contents for ADE-75
Page 22: ...18...