ADC 410F User Manual Download Page 68

Page: 68 / 106

Viewing Network Statistics

Megabit Modem 410F and 420F User Manual

View the following LAN information:

System time and date and total hours since power on occurred.

IP and Ethernet addresses for the modem LAN port.

Total number of IP packets processed and the number of packets with incorrect
checksums since power on occurred or the statistics were last cleared.

Number of errored packets detected at this port and the number of packets
forwarded since power on occurred or the statistics were last cleared.

Number of packets reassembled at this port and the number of transmissions where
a route was not found in router table since power on occurred or the statistics were
last cleared.

Total number packets received and transmitted since power on occurred or the
statistics were last cleared.

Collisions is not supported.

Selecting

Clear

resets all statistics.

Summary of Contents for 410F











































































































Search results

Summary of Contents for 410F

Reviews:

Related manuals for 410F

Brands by name

Popular brands

ADC 410F, User Manual

Search results

Summary of Contents for 410F

Reviews:

Related manuals for 410F

Brands by name

Popular brands