ADC 410F User Manual Download Page 10

Page: 10 / 106

Features

Megabit Modem 410F and 420F User Manual

EATURES

The Megabit Modem 410F and 420F provide:

•

fixed-rate or rate-adaptable ADSL transmission downstream at up to 7.552 Mbps and
upstream at up to 928 kbps

•

Dynamic Host Configuration Protocol (DHCP) server to provide network configuration
information including IP addresses to LAN devices

•

Trivial File Transfer Protocol (TFTP) for software upgrades

•

AccessGain™ software that provides access through an HTTP server to configure, manage,
and monitor the modem through a Web-based interface from the LAN or WAN port

•

SNMP agent for management through any industry standard SNMP platform from the
LAN or WAN port

•

autosensing 10/100BASE-T Ethernet port for connection to the LAN

•

LEDs that provide continual status at-a-glance for power, LAN, and ADSL connections

Chapter 9

“Technical Reference” on page 67

provides more information about the technologies

implemented in the Megabit Modem 410F and 420F.

Summary of Contents for 410F











































































































Search results

Summary of Contents for 410F

Reviews:

Related manuals for 410F

Brands by name

Popular brands

ADC 410F, User Manual

Search results

Summary of Contents for 410F

Reviews:

Related manuals for 410F

Brands by name

Popular brands