ADB Safegate CRE 10, Installation Manual

Page: 12 / 86

12 A.07.370e - Edition 2.0
Safety
2.7 Operation
Only skilled personnel, physically capable of operating the equipment and with no impairments in their
judgment or reaction times, should operate this equipment.
Read all system component manuals before operating the equipment. A thorough understanding of system
components and their operation will help you operate the equipment safely and efficiently.
„
Before starting this equipment, check all safety interlocks and protective devices such as panels and
covers. Make sure all devices are fully functional. Do not operate the equipment if these devices are not
working properly. Do not deactivate or bypass automatic safety interlocks or locked-out electrical
disconnects or pneumatic valves.
„
Never operate equipment with a known malfunction.
„
Do not attempt to operate or service electrical equipment if standing water is present.
„
Use the equipment only in the environments for which it is rated. Do not operate the equipment in humid,
flammable, or explosive environments unless it has been rated for safe operation in these environments.
„
Never touch exposed electrical connections on equipment while the power is ON. Make sure the exposed
electrical connections are proven to be dead.
2.8 Use of the optional circuit selector cabinet
If the optional circuit selector cabinet is installed below the cabinet of the equipment, prevent situations
where the equipment can tilt and fall. The circuit selector cabinet has an effect on the weight balance of the
equipment. A falling equipment can result in personal injury or death.
2.9 Action in the event of an equipment malfunction
Do not operate a system that contains malfunctioning components. If a component malfunctions, turn the
system OFF immediately.
1. Disconnect and lock out electrical power.
2. Allow only skilled personnel to make repairs. Repair or replace the malfunctioning component according
to instructions provided in its manual.
2.10 Maintenance and repair
Allow only skilled personnel to perform maintenance, troubleshooting, and repair tasks. Only persons who
are properly trained and familiar with ADB Safegate equipment are permitted to service the equipment.
„
Always use safety devices when working on the equipment.
„
Follow the recommended maintenance procedures in your equipment manuals.
„
Do not service or adjust any equipment unless another person trained in first aid and Cardio Pulmonary
Resuscitation (CPR) is present.
„
Connect all disconnected equipment ground cables and wires after servicing equipment. Ground all
conductive equipment.
„
Use only approved ADB Safegate replacement parts. Using unapproved parts or making unapproved
modifications to equipment may void agency approvals, impair specified performance and create safety
hazards.
„
Check interlock systems periodically to ensure their effectiveness.
„
Do not attempt to service electrical equipment if standing water is present. Use caution when servicing
electrical equipment in a high-humidity environment.
„
Use tools with insulated handles when working with electrical equipment.