18
To navigate in the Menu, use the four directions of the JOYSTICK: up and down will move up and down the
highlighted choice, right will select the highlighted choice navigating deeper by one level in the menu, left
will step back to the previous menu level.
For further details, please refer to
2WIN Operator manual > Section 9.7 - Menu
8.4 Before operation
After completely charging the device, be sure to set up date and time. Current date and time will be also used
into the measurement
exam’s
report.
The 2WIN device has an automatic hardware self-test procedure that can be activated as an option from the
2WIN inside KALEIDOS, as follows:
Menu > Functions > Aux > Auto test
. This procedure may be executed any
time to verify hardware integrity.
8.5 Data management disclaimer
When turned on the first time, 2WIN-S present a disclaimer related to the management of data telemetry of
the instrument. The operator is asked to read the document and accept the terms, if not 2WIN-S will work
but some functionalities will be disabled (Telemetry and Remote access). You can read the document at the
end of this manual (Appendix A) for all the details.
8.6 Important notes on Battery
The device must be charged at least once every 30 days.
When using 2WIN-S, the 2WIN is connected to the KALEIDOS battery pack through the USB cable:
2WIN
’
s internal battery must be removed, whether the battery was inserted for using the 2WIN
separately.
Detaching the USB cable, the 2WIN will switch off in 3 seconds.
9
Operative instructions
To power on the 2WIN-S, push the ON/OFF BUTTON on the Control Panel of the KALEIDOS (refer to Section
7.5).
To turn OFF the device, long press the ON/OFF BUTTON. Alternatively, you can turn off the device from the
KALEIDOS App as follows:
Settings > General > System > Shut Down
.
2WIN-S has no auto-shutdown timer.
