Adaptec 5325301638 - Snap Server 4500 NAS, Administrator'S Manual

Page: 127 / 148

Installing Third-Party Agent Software
113
8
You will be prompted for the NetBackup server name and for the NetBackup
client name.
• Specify the hostname of the already existing NetBackup Server on your
network for the NetBackup server.
• Specify the name of the Snap Server to which you are installing as the
NetBackup client.
9
Close the SSH client, and then return to the Administration Tool and do the
following:
a
To disable SSH on the Snap Server, navigate to the
System > SSH
screen, select
No , and then click
OK
. SSH is immediately disabled.
b
To start the newly installed backup agent, navigate to the
Maintenance >
Shutdown/Reboot
screen, and click
Reboot
. In the future, the NetBackup client
will start each time you reboot the Snap Server.
10
Delete the NBClients and Linux directories that you copied from the CD to the
Snap Server as they are no longer needed.
11
To verify the success of the installation, use your backup management software
to configure and run a test backup.
Errors Messages To Be Ignored
Tip
Towards the end of the installation, errors about copying Java UI files that are of
no consequence to backup functionality may display. Simply ignore these messages.
You may receive this error after specifying the NetBackup server:
./NBClients/catalog/anb/client.inst: ${Trace_File}: ambiguous
redirect
You may receive these errors at the end of the installation due to not installing the
unnecessary Java files:
Error reading the cdrom.
A problem was encountered installing Java pieces.
Aborting.
A failure was detected running /shares/SHARE1/NBclientinstall/
NBClients/anb/Clients/usr/openv/netbackup/client/Linux/
RedHat2.4/cp_to_client DARKSTAR-2K eemp