Adaptec 5325301638 - Snap Server 4500 NAS, Administrator'S Manual

Page: 124 / 148

Installing Third-Party Agent Software
110 Snap Server Administrator Guide
Installing the VERITAS NetBackup 4.5 FP6 Client
This section describes how to install the Veritas NetBackup 4.5 FP agent on a Snap
Server to enable interoperability with NetBackup 4.5 Feature Pack 6 for Windows.
Procedures for installing from the following media are given:
• The CD for
Veritas NetBackup 4.5 Feature Pack 6 for AIX, HP- UX
• The tarball named NB45FP6_AIX_HP_Linux.tar.Z
Tip
At the time this document was published, the tarball was available at the
following URL: http://seer.support.veritas.com/docs/264638.htm .
Installation from a Tarball
This procedure assumes you created a directory on the Snap Server for the purposes
of this installation at
/shares/SHARE1/NBclientinstall .
1
Connect to the Snap Server via SSH, and log in as admin using your admin user
password.
2
To change to superuser, enter the following command and press
Enter
:
su -
3
At the prompt, enter the admin user password, and press
Enter
.
4
To change to the NBclientinstall directory, enter the following command and
press
Enter
:
cd /shares/SHARE1/NBclientinstall
5
To unpack the agent files, enter the following command and press
Enter
:
tar -xvzf NB45FP6_AIX_HP_Linux.tar.Z
6
A number of files and directories are listed. Delete the unecessary Java
installation files by running the following command:
rm -vR /shares/SHARE1/NBclientinstall/NB-Java
7
To start the NetBackup client install run the following command:
./NBClients/catalog/anb/client.inst