manualshive.com logo in svg

Adaptec 5325301638 - Snap Server 4500 NAS, Administrator'S Manual, Page: 98 / 148

Share
Download
Adaptec 5325301638 - Snap Server 4500 NAS Administrator'S Manual Download Page 98

The Meaning of LED Indicators

84

Snap Server Administrator Guide

The Meaning of LED Indicators 

LED indicators provide information on the status of basic connectivity, disk drives, 
fan modules, and power supply modules.

Snap Server 4200/4500/15000 Status & Drive Light Behavior

The server has two status lights, two network lights, and two lights for each of the 
four disk drives, as shown in the following illustration:

Snap Appliance recommends that you become familiar with the operation of these 
lights.

Power, System, and LAN LEDs

These status lights are located to the right of the power button. Looking at the 
server from the front, the lights appear in the following order, from left to right: 
power LED, system LED, LAN 1 (Ethernet1) LED, and LAN 2 (Ethernet2) LED. The 
LEDs operate as described in the following tables:

Power LED

Blinking green 

The server is initializing (booting up).

Solid green 

The server is powered on.

Off

The server is powered off.

System LED

Blinking green 
(once per second)

The server is booted up and operating normally.

Power LED

System LED

LAN LEDs

Disk Drive LEDs

Summary of Contents for 5325301638 - Snap Server 4500 NAS





















































































































































Reviews:

No comments