3-24
Adaptec RAID Installation Guide
13
Select
Edit startup.ncf
. If needed, edit the file so that
i2opci.nlm
is listed before
bkstrosm.ham
in your
startup.ncf
file.
14
Shutdown and restart the server.
Installing the Driver for a Boot Controller in a New
NetWare 5 Server
In this scenario, you are installing the Adaptec RAID controller as a
boot controller in a new NetWare 5 server. To install the driver
1
Create a driver floppy disk using the
Adaptec RAID Installation CD
.
To create the disk
a
Insert the
Adaptec RAID Installation CD
in your drive and a
blank floppy disk in the floppy disk drive.
b
Copy all the files in
\packages\netware\5.
x
\driver
to the floppy
disk.
c
Remove the
Adaptec RAID Installation CD
and the driver
floppy disk.
2
Install the Adaptec RAID controller as the primary controller
and attach the disk drives.
3
Start up the server. During restart, press
Ctrl+A
to start SMOR.
Use SMOR to create the RAID. For details, refer to
Using
SMOR
on page 2-10
.
4
Install and configure a secondary controller, if any.
5
Create a directory on the
C
drive named
nwupdate
.
6
Insert the driver disk you created in
Step 1
.
7
Copy
a:\
to
c:\nwupdate
.
8
Start the NetWare installation program from the CD.
9
On the Server Drivers – Summary menu, highlight
Disk and
CD-ROM Drivers
and press
Enter
.
10
When prompted select
i2opci.nlm
and
bkstrosm.ham
as
drivers.
11
Complete the NetWare installation according to the Novell
documentation.