3-23
Installing the Driver
Installing the Driver in an Existing NetWare 4.2 Server
In this scenario, you are integrating an Adaptec RAID controller into
an existing Novell NetWare 4.2 server as a secondary controller. To
install the driver
1
Upgrade your NetWare server to the minimum patch level
specified by Novell.
2
Create a driver floppy disk using the
Adaptec RAID Installation CD
.
To create the disk
a
Insert the
Adaptec RAID Installation CD
in your drive and a
blank floppy disk in the floppy disk drive.
b
Copy all the files in
\packages\netware\4.11\driver
to the
floppy disk.
c
Remove the
Adaptec RAID Installation CD
and the driver
floppy disk.
3
Shutdown the server.
4
Install and configure the Adaptec RAID controller as a
secondary controller according to the instructions in
Chapter 2
.
Note the slot occupied by the controller; you will need this
information later in the install process.
5
Start up the server. During startup, press
Ctrl+A
to start
SMOR. Use SMOR to create the RAID. For details, refer to
Using SMOR
on page 2-10
.
6
Start NetWare.
7
When the console prompt appears, type
load
install
and
press
Enter
.
8
Select
Install a Product
and press
Enter
.
9
Select
Install a Product Not Listed
and press
Enter
.
10
Insert the disk you created in
Step 2
and install I
2
O and block
storage support only.
11
Accept the defaults for the remaining options.
12
Return to the main install screen and select
NCF Options.