3-17
Installing the Driver
5
If Windows did not discover the devices during startup, open
the Device Manager. Look for a PCI card entry in the Other
Devices category. There may be multiple entries if you have
multiple Adaptec RAID controllers installed. There may also
be an entry for a PCI memory controller.
Note:
If you are not prompted for a PCI card or memory
controller driver, open the Device Manager. If the Device
Manager displays
PCI Card
with a yellow exclamation mark
in the Other Devices list, you might need a patch for your
motherboard chipset to recognize multifunction bridge
controllers. Contact your motherboard vendor and apply
the patch. After the patch is installed and the system is
restarted, Windows repeats the device discovery process.
Continue the procedure.
6
Select
PCI Card
and then select
Update Driver
from the Driver
tab.
7
Insert the driver disk you created earlier (refer to
page 3-11
)
and let Windows search for the drivers.
8
Windows should now identify the PCI card as
Adaptec I
2
O
RAID Host Adapter
. Select
Finish
. At this point, you might need
to force Windows to copy the driver from the floppy drive
instead of the CD drive.
9
When prompted regarding testing the device ROM, click
Cancel
.
10
Open the Device Manager. If the Other Devices category shows
a PCI memory controller, select it, click the
Driver
tab, and
select
Update Driver
.
11
Let Windows search for the drivers from the driver disk you
created earlier (refer to
page 3-11
).
12
Windows should now identify the PCI memory controller as
Adaptec I
2
O Memory Adapter
. Select
Finish
. At this point, you
may need to force Windows to copy the driver from the floppy
drive instead of the CD drive.