manualshive.com logo in svg

Adaptec 2074700-R - ICP Vortex GDT8514RZ RAID Controller, Manual, Page: 47 / 214

Share
Download
Adaptec 2074700-R - ICP Vortex GDT8514RZ RAID Controller Manual Download Page 47

Software Installation and User’s Guide

47

Quick Installation

5. NetWare will copy the necessary files, automatically load ICPCON.NLM, and modify 

the AUTOEXEC.NCF file to load ICPCON.NLM for each subsequent  restart of the 
server.

3.7.2.2

Configuring Tools for Remote Access

1. Create a group SRC_Operator in the NDS.

2. Add the Admin and all other users who will use this interface.

3. Load SRCIPX.NLM.

4. Start ICP RAID Console (ICPCON.exe) or ICP RAID Navigator (ICP RAID 

Navigator.exe) from a workstation using a user name of the group SRC_Operator and 
his/her NetWare password.

3.7.3

SCO UnixWare 7.1.1 or 8.0

No additional steps are necessary to install the RAID Software Suite once you have 
completed the installation described in 

Section 3.6

.

Summary of Contents for 2074700-R - ICP Vortex GDT8514RZ RAID Controller























































































































































































































Reviews:

No comments