Adaptec 2074700-R - ICP Vortex GDT8514RZ RAID Controller, Manual, Page: 129 / 214

Software Installation and User’s Guide 129
ICP RAID Console
•
Select the Configure Physical Devices option and press Enter to display the Select
Physical Drive screen.
•
Select a disk and press Enter to display the Configure Disk screen.
•
Select either the Lock Disk or Unlock Disk option and press Enter.
This option is only available when you have selected a removable hard disk (for example,
Iomega* or SyQuest*). Before you can initialize a cartridge, you must lock it. Before
removing it, you must unlock it.
10.5.2.7 Enclosure Status or Enclosure Slot Configuration
To access these functions, from the Advanced Setup menu:
•
Select the Configure Physical Devices option and press Enter to display the Select
Physical Drive screen.
•
Select an enclosure and press Enter to display the Configure Disk screen.
•
Select the Enclosure Status or Enclosure Slot Configuration option and press Enter.
Before you can use the auto hot plug with a SAF-TE subsystem, you must configure the
subsystem (more precisely, its intelligence, the so-called SEP SAF-TE Enclosure
Processor).
After you select the Enclosure Status option, ICPCON displays the Enclosure Status
screen (see Figure 10-76 ).
Figure 10-76. Enclosure Status
Note:
Un-initialized disks cannot be configured as no RAID configuration information can be
stored on these disks.
After you select the Enclosure Slot Configuration option, ICPCON displays the Enclosure
Slots screen (see Figure 10-77 ). To assign a specific hard disk to a SAF-TE enclosure slot,
press Enter on the empty slot and choose one of the hard disks.
Figure 10-77. Enclosure Slots
Figure 10-78 shows a block diagram of a SAF-TE subsystem.