©Adam Equipment Company 2008
10
5.6
AUTOMATIC MEMORY ACCUMULATION
•
The indicator can also be set to store the weight values in
memory automatically as above accumulation control setting.
Ensure it has been enabled (see section 8.0).
•
To check the total accumulation, press the
[Kg/lb /Set]
key. If
the memory already has values stored in it the display will
show how many entries have been stored. i.e. “
n 5
”,
followed by the total stored value, this value will scroll across
the display if it is too large to fit the display digits (> 999999).
•
If the memory has previously been cleared it will show “
n 0
”
followed by zero weight.
•
If you wish to clear the memory press the
[Kg/lb /Set]
to view
totals then
[Zero]
when the totals are being displayed key.
5.7
ACCUMULATION VALUE DISPLAY, PRINT AND CLEAR
•
Press
[Kg/lb /Set]
key.
•
The display will indicate the times of accumulation for
example; “
n 52
”, 2 seconds later display the accumulated
weight “
23506.5
”
if in the weighing mode.
•
If in count mode, it will display the times of accumulation, “
n
52
”
, 2 seconds later the total number of count accumulated
will be displayed “
12508
”.
•
When the number “
n 52
” is displayed and before the total is
shown, press the
[Acc/
]
key, the accumulated value will be
printed if communication address is 99.
•
When the number “
n 52
” is displayed and before the total is
shown, press
[Zero]
to clear the accumulated value.
Summary of Contents for AE-202
Page 2: ...Adam Equipment Company 2008...
Page 4: ...Adam Equipment Company 2008 2...
Page 24: ...Adam Equipment Company 2008 22...
Page 26: ...Adam Equipment Company 2008 24...
