©Adam Equipment Company 2008
8
5.0
OPERATIONS
5.1
POWER
•
Attach the mains power adapter to the power supply. The
indicator will charge the internal battery whenever it is
connected to the 230VAC power supply.
•
To turn on the AE-202, turn on the power switch at the rear of
the indicator and then press the
[On/Off]
key.
•
The display will show the software revision then a self test,
showing the segments are all working. The message “
bPt xx
”
will be shown before the display goes to zero. This is an
indication of the percentage of charge of the internal battery.
The value “
xx
” will vary from a low value of about 10% to a
maximum of 99%.
•
To switch off the power press the
[On/Off]
key again. It may
be necessary to hold the key a few seconds, until display
shows “–
oFF
– “. When the power is to be off for a long time as
in storage or shipping, turn off the switch at the rear to save
the battery from being drained.
5.2
ZERO FUNCTION
•
To zero the display press the key
[Zero]
with nothing on the
platform.
•
The
Zero
indicator will be on.
5.3
TARE FUNCTION
•
When the scale has a container on it press the
[Tare]
key
when the
Stable
indicator is on. It will display zero. The
NET
indicator will be turned on.
•
To cancel the tare value, press the
[Tare]
key again. The
NET
indicator will be switched off and the gross weight will be
displayed.
Summary of Contents for AE-202
Page 2: ...Adam Equipment Company 2008...
Page 4: ...Adam Equipment Company 2008 2...
Page 24: ...Adam Equipment Company 2008 22...
Page 26: ...Adam Equipment Company 2008 24...
