Adam Equipment WBK 165a, User Manual

Page: 16 / 44

Page 14
PERCENT WEIGHING
The scale can be set to perform percent weighing. See Section 7.2.
The scale will use a mass on the platform as the 100% reference weight. If the
platform is empty (or the scale is tared) then the user can input a reference
weight using the keypad.
NOTE: The weight value entered as 100% must be greater than 50 scale
divisions. The display may jump by large numbers unexpectedly if small
weights are used to set as 100% reference. The scale checks if the weight is
too small and will show Error 7
•
Press [Func/C]. The first option is “
FunC 1
”. press the [Func/C] key again
display “
FunC 2
”.
•
Press the [ 0/T     ] key. “
P1 PCt
” will be displayed.
•
Press [ 0/T     ] again to enter percent weighing. The scale will set the
sample mass on the platform as 100% reference weight.
•
Remove the sample weight. Then any other weight placed on the scale
will be displayed as a percentage of the original sample. For example, if
3500g is placed on the scale and percent weighing is selected, the
display will show 100.0%. Remove the 3500g weight and place a 3000g
weight. The display will show 85.7% as 3000g is 85.7% of 3500g.