Adam Equipment WBK 165a User Manual Download Page 6

Page: 6 / 44

Page 4

3.0

INSTALLATION

UNPACKING

The WARRIOR scales have already been adjusted to work with a platform and
have been configured for this application. The platform and indicator have been
calibrated as a pair and must be used together.

LOCATING

•

The scales should not be placed in a location that will
reduce the accuracy.

•

Avoid extremes of temperature. Do not place in direct
sunlight or near air conditioning vents.

•

Avoid unsuitable tables. The table or floor must be
rigid and not vibrate.

•

Avoid unstable power sources. Do not use near large
users of electricity such as welding equipment or
large motors.

•

Do not place near vibrating machinery.

•

Avoid high humidity that might cause condensation.
Avoid direct contact with water. Do not spray or
immerse the scales in water.

•

Avoid air movement such as from fans or opening
doors. Do not place near open windows or air-
conditioning vents.

•

Keep the scales clean. Do not stack material on the
scales when they are not in use.

Summary of Contents for WBK 165a













































Search results

Summary of Contents for WBK 165a

Reviews:

Related manuals for WBK 165a

Brands by name

Popular brands

Adam Equipment WBK 165a, User Manual

Search results

Summary of Contents for WBK 165a

Reviews:

Related manuals for WBK 165a

Brands by name

Popular brands