© Adam Equipment Company 2020
If “Custom” unit is available and selected, the balance will prompt for entering a multiplier by
displaying “CF 1.2345”, where “1.2345” is the last stored value. Any value ranging from
0.100 to 10.000 may be entered, by which the weight in grams will be multiplied before being
displayed. If a multiplier of greater than 1.000 is entered, the number of decimal places
displayed will be reduced by one. This multiplier value will be saved for the next use until it
is changed by the user.
The balance displays the alternate weighing units with as much precision as possible. For
example, the LPB 423 balances (420g x 0.001g) could weigh up to:
Unit
Maximum
d =
g
420
0.001
mg
420000
1
kg
0.420000
0.000001
ct.
2100
0.005
dwt
270.066
0.001
GN
6481.59
0.02
ozt
13.50330
0.00005
oz
14.81505
0.00005
Lb
0.92594
0.00001
N
4.1188
0.0001
10.4
FUNCTIONS
When weighing, the user can access the applications that have been enabled (see section
13.2).
The following applications are available depending on model:
Parts counting
Percent weighing
Check weighing
Animal (Dynamic) weighing (some models)
Net/ Total
Density determination (Liquid & Solid) (some models)
The selectable functions can be enabled in supervisor mode and are selected by pressing
the
[Mode]
key to enter selection mode. The display will go blank and a small
will appear at the top of the display, such as “
Dynamic
”, “
Density Solid
”, “
Parts
” etc. Use the
[Up]
and
[Down]
symbol keys to cycle through functions, and press
[Setup]
to confirm your
selection, or press one of the
[
0/T
]
keys at any time
to return to normal weighing mode.
