© Adam Equipment Company 2020
Select a code for one of the pre-set data formats as detailed above.
The next line shows
prints time.
Only one item can be entered per line.
Continue until the formatting of the form is complete. There are 15 lines of possible data.
After the 15th line has been set or
has been selected, the balance will return to the
Sub-menu
Press
[Mode]
to advance to setting of the next menu, or press
[
0/T
]
to return to normal
weighing
13.5
SETUP PARAMETERS
The user parameters that control the balance are shown under the setup menu. When
is displayed, press the
[Setup]
key. The options for each parameter can be scrolled
through by using the
[Up]
or
[Down]
key. Use the
[Up]
and
[Down]
keys to increase or
decrease the value for setting. Press
[Setup]
to accept the setting and advance to the next
item in the menu
Press
[Mode]
to advance to setting of the next parameter or
[
0/T
]
to return to normal
weighing
Select menu language from available options.
Set real-time clock using the keypad numeric entry method. HH:MM:SS.
Set date display format using the keypad numeric entry method. European (DD/MM/YY) or
USA format (MM/DD/YY).
Set date using the keypad numeric entry method. YEAR, MONTH, DAY, WEEKDAY
Enter a user number to identify this balance on print output. Range 1 - 9999999
On = Enable sound alerts
OFF = Disable sound alerts
AUTO = Always on unless balance is not used for 5 minutes, then turns off automatically until
key is pressed or weight >20d is detected.
ON = Permanently on
[text deleted]
On = Power-saving mode
enabled
. Sets the inactivity period after which unit will go into
stand-by mode. Range 1 – 9 minutes.
OFF = Power-saving mode
disabled
.
The filter tracks and averages weighing to produce the most accurate measurement and
smooth out instabilities. A higher filter number means more filtering and a slower, but possibly
more stable and accurate response. A lower number will produce a quicker measurement but
it may be less stable and accurate. Range 1 (low) to 9 (high).
Recommended value for normal use: 5
ON = A fine filter which provides better performance when weighing whilst pouring a
substance such as liquid or powder into a container on the pan.
OFF = No filtering. Recommended setting for normal use.
Set a value to be used to determine balance stability. The number corresponds to the number
of divisions the weight reading is fluctuating by. A larger number corresponds to a larger
stable zone. Selectable values: 1, 2, 5 or 10 (divisions).
Recommended value for normal use: 1
ON = Auto-zero function. Selectable values: 1, 2, 5, 10 or 15 (divisions).
OFF = Auto-zero function disabled.
Recommended value for normal use: ON, 5
