16 © Adam Equipment Company 2011
NOTE:
When the container is removed a negative value will be shown. If the
indicator was tared just before removing the container, this value is the gross
weight of the container plus all products which were removed. The zero
indicator will also be on as the platform is back to the same condition it was
when
[Zero]
was pressed last.
If the value to be tared is very large the scale may not allow you to tare the value as
the negative value will not fit on the display area. In this case the scale will beep
twice when the
[Tare]
key is pressed and then return to normal weighing without
setting tare.
Press
[Tare]
or
[Zero]
to remove the tare value and display zero. The Net indicator
will disappear.
11.2.2
PRESET TARE (NOT AVAILABLE ON GK-M APPROVED INDICATORS)
When the indicator is at zero with no weight on the platform it is possible to enter a
preset tare.
•
Zero the indicator by pressing
[Zero]
. The zero indicator will be on.
•
Enter a value using the numeric keys.
•
Press
[Tare]
to tare the indicator. The value that was entered is stored
as the tare value and it is subtracted from the display, leaving a
negative number on the display.
