9 © Adam Equipment Company 2011
Figure 1A shows the connections to a 6 wire load cell. Figure 1B shows a preferred
method to attach a 4 wire load cell, using a 6 conductor cable to go from the
indicator to the platform or load cell where it connects to the 4 wires from the load
cells. The Excitation and sense wires are connected together near the load cell.
For less exacting applications you can connect the excitation to the sense at the
connector.
KEYPAD
KEYS
PRIMARY FUNCTION
SECONDARY FUNCTION
[Zero]
Sets the zero point for all subsequent
weighing. The display shows zero.
Escape from any setting menus
[Tare]
It tares the indicator and stores the current
weight in memory as a tare value, subtracts
the tare value from the weight and shows
the results. This is the net weight.
Accept the set values
[Unit]
This is used to select the weighing units
from a preset list of available units.
Allows the weight, unit weight, and
count to be seen when parts
counting or to change from weight
to % in percent weighing
