![background image](http://html1.mh-extra.com/html/adagio/water-features/water-features_installation-instruction_2845892008.webp)
7
(B)
Now reinstall the baffle into the distribution unit and bend the upper copper tabs back into place. These tabs strictly
hold the baffle in place. You do not need to force the tabs up. Bend them up until the baffle will not come out of the
distribution unit, but still has a little room to move.
(C)
Before turning the water back on, clean the copper distribution unit with scotch-brite pad again. This will remove
any natural oils that may have been transferred from your fingers.
You may have to repeat this process until you have the desired water flow.
Outer Edge Adjustment Tabs:
The outer edge adjustment tabs are on either end of the water
distribution unit. These tabs control the water flow at the edges of the
surface. If there is a large amount of water flow at one or both of the
edges of your water feature you may experience a small amount of
dripping off these tabs.
(4) If this occurs, simply bend the tabs in and back to redirect the
water on to the surface.
The tabs should be touching the front of the
copper unit, the copper is made out of a pliable copper so tabs will not
break or crack when bent.
- DO NOT apply the scoth-brite pad to mirror or custom engraved logos, they can get scratched -
H – Lighting
Now screw in the supplied light bulb(s) into the socket(s):
50 watt halogen GU10
bulb(s) are included as a courtesy (this bulb is not covered under the warranty). Replacement
bulbs can be purchased at most hardware stores. Please refer to the chart on page 2 for how many bulbs come with your
feature.
- WARNING: As always, never remove or insert the power cords or light bulbs while the
water feature is turned on. Doing so could result in electric shock. -
Summary of Contents for Water Features
Page 1: ......