4
A - Unpacking the Crate Box
Before beginning the installation unpack and un-wrap everything.
The pebbles, electrical cord etc. are packed
underneath the plastic tray (pebble shelf).
(1) Loosen the screw from the pebble shelf and remove it. The packet
will be underneath. (2) Clean out and discard any packing material and debris.
IF ANY ITEMS WERE DAMAGED IN TRANSIT PLEASE CONTACT ADAGIO IMEDIATELY!! (801-255-9484)
Adagio will not assume responsibility for freight damages not reported
within 48 hours of delivery
. Please take
photos of any damaged items as this will assist us in sending replacement parts.
B - Marking the Wall
Before you begin hanging the brackets you need to mark the wall in a few places.
(1) First, you need to have a clear idea of where on the wall the water feature is going to hang.
To help with this,
please refer to the chart on page 2 for dimensions.
(2) Next, using a pencil put a small dot on the wall to represent the top center of the water feature.
(3) Lastly mark where each stud is in the area of the water feature.
These marks will be covered by the water
feature when everything is completed. You may want to use a stud finder to insure the accuracy of the marks.
C - Locate and Mount the Wall Bracket
(1) The wall bracket is attached to the top, back of the water feature.
Remove the bracket from the feature.
(2) Using the top center mark, position the wall bracket and mark the
slots on the wall.
Take extra care to insure the wall bracket is level on the
wall.
(3) Mounting the Bracket.
Use the included lead EZ anchors and 1
inch screws to fasten the bracket into the sheetrock. In the area of a
stud use the longer 2.5 inch screws directly into the stud
.
We
recommend fastening into at least one stud.
Summary of Contents for Water Features
Page 1: ......
