14
Care & Maintenance
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives.
This product is NOT waterproof. To reduce the risk of fire, electric shock, or
damage, do not expose to rain, moisture, or immerse in water. To reduce the
risk of electric shock, DO NOT disassemble or modify this product. Take this
product to the manufacturer when repair work is required. Opening the case of
the radio or the power dock/adapter voids the warranty. This product contains
NO user serviceable parts.
Specifications
POWER
3 x AA alkaline batteries (not included)
AC power adapter (included)
Voltage: 4.5V; Current: 300mA
Standard: UL/CUL: E149533; CEC: Yes
CHANNELS
Digital PLL tuning for 7 NOAA channels:
Channel 1 - 162.400 MHz
Channel 2 - 162.425 MHz
Channel 3 - 162.450 MHz
Channel 4 - 162.475 MHz
Channel 5 - 162.500 MHz
Channel 6 - 162.525 MHz
Channel 7 - 162.550 MHz
WIRELESS RANGE
up to 50 miles (80 km)
VOICE OUTPUT
77dB/1m ( 1 KHz )
SENSITIVITY
( -5dB )
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, There is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Such modifications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
