71
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
*1:On the left: Models with navigation system
On the right: Models without navigation system
Indicator
Name
On/Blinking
Explanation
Message
*1
Malfunction
Indicator Lamp
●
Comes on when you set the power
mode to ON, and goes off either
when the engine starts or after
several seconds if the engine did not
start. If “readiness codes” have not
been set, it blinks five times before it
goes off.
●
Comes on if there is a problem with
the emissions control system.
●
Blinks when a misfire in the engine’s
cylinders is detected.
●
Readiness codes are part of the on
board diagnostics for the emissions
control systems.
2
Testing of Readiness Codes
P. 503
●
Comes on while driving
- Have the
vehicle checked by a dealer.
●
Blinks while driving
- Stop in a safe
place where there are no flammable
objects. Stop the engine for 10 minutes
or more, and wait for it to cool down.
Then, take the vehicle to a dealer.
2
If the Malfunction Indicator Lamp
Comes On or Blinks
P. 484
Charging
System
Indicator
●
Comes on when you set the power
mode to ON, and goes off when the
engine starts.
●
Comes on when the battery is not
charging.
●
Comes on while driving
- Turn off the
climate control system and rear
defogger in order to reduce electricity
consumption.
2
If the Charging System Indicator
Comes On
P. 483
15 ACURA RLX-31TY26100.book 71 ページ 2014年5月19日 月曜日 午後5時43分