377
uu
When Driving
u
Vehicle Stability Assist (VSA
®
), aka Electronic Stability Control (ESC), System
Driving
This button is on the driver’s side control
panel. To turn the VSA
®
system on and off,
press and hold it until you hear a beep.
VSA
®
will stop and the indicator will come on.
To turn it on again, press the (VSA
®
OFF)
button until you hear a beep.
VSA
®
is turned on every time you start the
engine, even if you turned it off the last time
you drove the vehicle.
■
VSA
®
On and Off
1
Vehicle Stability Assist (VSA
®
), aka Electronic Stability Control
(ESC), System
Without VSA
®
, your vehicle will have normal braking
and cornering ability, but it will not have VSA
®
traction and stability enhancement.
In certain unusual conditions when your vehicle gets
stuck in shallow mud or fresh snow, it may be easier
to free it with the VSA
®
temporarily switched off.
When the VSA
®
system is off, the traction control
system is also off. You should only attempt to free
your vehicle with the VSA
®
off if you are not able to
free it when the VSA
®
is on.
Immediately after freeing your vehicle, be sure to
switch VSA
®
on again. We do not recommend driving
your vehicle with the VSA
®
and traction control
systems switched off.
If the low tire pressure/TPMS indicator comes on or
blinks, the VSA
®
system comes on automatically. In
this case, you cannot turn the system off by pressing
the
button.
You may hear a motor sound coming from the
engine compartment while system checks are being
performed immediately after starting the engine or
while driving. This is normal.
VSA
®
OFF Indicator
15 ACURA RLX-31TY26100.book 377 ページ 2014年5月19日 月曜日 午後5時43分