432
uu
Replacing Light Bulbs
u
Front Side Marker Light Bulbs
Main
tenan
ce
Front Side Marker Light Bulbs
When replacing, use the following bulbs.
1.
Turn the steering wheel all the way to the
opposite side from the light being replaced.
Passenger’s side
: Turn the steering wheel
to the left.
Driver’s side
: Turn the steering wheel to
the right.
2.
Remove the holding clips (A) and (B), pull
the inner fender back.
3.
Turn the socket to the left and remove it,
then remove the old bulb.
4.
Insert a new bulb.
Side Turn Signal/Emergency Indicator Light Bulbs
Door mirrors have the side turn lights. Have an authorized Acura dealer inspect and
replace the light assembly.
Front Side Marker Light: 3 CP
1
Front Side Marker Light Bulbs
When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.
Insert the clip with the pin raised, and push until it is
flat.
Holding clip (B-type)
Clip
Push until the
pin is flat.
Inner Fender
Clip (A)
Clips (B)
Bulb
Socket
15 ACURA RLX-31TY26100.book 432 ページ 2014年5月19日 月曜日 午後5時43分