uu
If a Tire Goes Flat
u
Temporarily Repairing a Flat Tire
460
Han
d
lin
g the U
n
expected
4.
Plug in the compressor to the accessory
power socket.
u
Be careful not to pinch the cord in a
door or window.
u
Do not plug any other electronic
devices into other accessory power
sockets.
2
Accessory Power Sockets
P. 167
5.
Start the engine.
u
Keep the engine running while injecting
sealant and air.
2
Carbon Monoxide Gas
P. 64
6.
Turn the selector switch to
SEALANT/
AIR
.
1
Injecting Sealant and Air
NOTICE
Do not operate the temporary tire repair kit
compressor for more than 15 minutes. The
compressor can overheat and become permanently
damaged.
Until the sealant injection is complete, the pressure
shown on the pressure gauge will appear higher than
actual. After the sealant injection is complete the
pressure will drop and then begin to rise again as the
tire is inflated with air. This is normal. To accurately
measure the air pressure using the gauge, turn the air
compressor off only after the sealant injection is
complete.
3
WARNING
Running the engine with the vehicle in an
enclosed or even partly enclosed area can
cause a rapid build-up of toxic carbon
monoxide.
Breathing this colorless, odorless gas can
cause unconsciousness and even death.
Only run the engine to power the air
compressor with the vehicle outdoors.
SEALANT/AIR
side
15 ACURA RLX-31TY26100.book 460 ページ 2014年5月19日 月曜日 午後5時43分