![background image](http://html1.mh-extra.com/html/acura/2004-nsx/2004-nsx_owners-manual_2844676094.webp)
−
−
−
Press the REPEAT
(Preset 3) button to continuously
play a song or passage. The light in
the button lights and stays on. The
track will repeat until you press the
RPT button again.
Press the REPLAY
(Preset 1) button to play the current
song or passage from the beginning.
The system goes into rewind, and
the light in the button flashes during
rewind. When it reaches the current
song or passage, it goes back to
PLAY.
Press the SCAN (Preset 2)
button to search the tape for a
desired passage. When you press the
SCAN button, the system goes into
fast forward. It goes back to PLAY
when it reaches the beginning of the
next song or passage. It plays that
song or passage for eight seconds
and then goes into fast forward again
to find the beginning of the next
song or passage. The system repeats
this until you press the SCAN button
again.
The SKIP, REPEAT,
REPLAY and SCAN functions use
silent periods on the tape to find the
end of a song or passage. These
features may not work if there is
almost no gap between selection, a
high noise level, or a silent period in
the middle of a selection.
The tape player picks up dirt and
oxides from the tape. This
contamination build up over time and
causes the sound quality to degrade.
To prevent this, you should clean the
player after every 30 hours of use.
If you do not clean the tape player
regularly, it may eventually become
impossible to remove the
contamination with a normal
cleaning kit. Your Acura dealer has a
cleaning kit available.
Playing a Tape
Comf ort and Convenience Features
REPEAT
REPLAY
Caring f or the Tape and Player
SCAN
91
NOTE: