If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air dry before
you use the vehicle.
Dirt build-up in the loops of the seat
belt anchors can cause the belts to
retract slowly. Wipe the insides of
the loops with a clean cloth
dampened in mild soap and warm
water or isopropyl alcohol.
The driver’s floor mat that came
with your vehicle hooks over the
floor mat anchor. This keeps the
floor mat from sliding forward and
possibly interfering with the pedals.
The plates on both the driver’s and
passenger’s floor mats should be
inserted between the rail motor and
seat rails underneath the seats.
If you remove the driver’s floor mat,
make sure to re-anchor it when you
put it back in your vehicle.
If you use a non-Acura floor mat,
make sure it fits properly and that it
can be used with the floor mat
anchor. Do not put additional floor
mats on top of the anchored mat.
Twice a year, clean the antenna mast
with a dry cloth and mild detergent.
Scrub the antenna in upward strokes
to avoid bending it. Rinse with water.
Make sure the antenna works
smoothly by turning the stereo off
and on several times with the
ignition switch ON (II). The antenna
does not need lubricating.
If you use a ‘‘drive-through’’ car wash,
make sure you turn the stereo off
first. This retracts the antenna to
prevent damage from the car wash
brushes.
Seat Belts
Floor Mats
Power Antenna
Seat Belts, Floor Mats, Power Antenna
Maintenance
157
PLATE
RAIL MOTOR
PLATE
FLOOR MAT
