Turning this dial clockwise increases
the temperature of the airflow.
Turn this dial clockwise to increase
fan speed and increase the airflow.
When
is pressed, the
indicator in the button comes on and
the air from the vehicle’s interior is
sent throughout the system again
(Recirculation mode).
The outside air intakes for the
heating and cooling system are at
the base of the windshield. Keep this
area clear of leaves and other debris.
The system should be left in Fresh
Air mode under almost all conditions.
Keeping the system in Recirculation
mode, particularly with the A/C off,
can cause the windows to fog up.
Use the MODE button to select the
vents the air flows from. Some air
will flow from the dashboard corner
vents in all modes. Each time you
press the MODE button, the display
shows the mode selected. Press the
button four times to see all of the
modes.
Air flows from the
dashboard and door vents. Close the
door vents when using the air
conditioning or the windows may fog
up.
Airflow is divided between
the dashboard/door vents and the
floor vents.
Air flows from the floor
vents.
Airflow is divided between
the floor vents and the defroster
vents at the base of the windshield.
These buttons control the source of
the air going into the system.
When you turn the A/C off, the
system cannot regulate the inside
temperature if you set the dial below
the outside air temperature.
This button turns the air
conditioning on and off. You will see
ON or OFF in the display.
When the
is pressed, the
indicator in the button comes on and
air is brought in from outside the
vehicle (Fresh Air mode).
Switch to Recirculation mode when
driving through dusty or smoky
conditions, then return to Fresh Air
mode.
Comf ort and Convenience Features
Temperature Control Dial
Air Conditioning (A/C) Button
Fan Control Dial
Mode Control Button
Recirculation/Fresh Air Buttons
Airflow Buttons
79
