©
2011 American Honda Motor Co., Inc. - All Rights Reserved.
BII 46119 (1108)
7 of 12
26. Route the four back-up sensor harness 2-pin
connectors through the vehicle panel. Seat the
back-up sensor harness grommet in the hole.
27. Secure the back-up sensor harness to the vehicle
panel with one wire tie. Using isopropyl alcohol,
thoroughly clean the areas where the cushion tape
will attach. Route the back-up sensor harness
toward the front of the vehicle and secure it to the
vehicle panel with three cushion tapes.
28. Route the back-up sensor harness forward and
secure it to the vehicle panel with two cushion
tapes.
5D27103B
VEHICLE
PANEL
CUSHION
TAPE
FRONT
WIRE TIE
BACK-UP
SENSOR
HARNESS
VEHICLE
PANEL
FRONT
(Through
this hole.)
5D27110B
4 VEHICLE
CLIPS
4 WIRE TIES
FRONT
BACK-UP
SENSOR
HARNESS
VEHICLE
HARNESS
BACK-UP
SENSOR
HARNESS
VEHICLE
HARNESS
CUSHION
TAPE
VEHICLE
PANEL
29. Continue to route the back-up sensor harness
along the vehicle harness and secure it to the
vehicle harness with four wire ties (secure the
wire ties beside the vehicle clips).
