10 of 12
BII 46119 (1108)
©
2011 American Honda Motor Co., Inc. - All Rights Reserved.
42. While wearing eye protection, drill a 19 mm hole in
the outside surface of the right quarter panel trim
at the pierced point. Remove all burrs.
40. Plug the back-up sensor harness 14-pin connector
into the control unit and install the control unit
bracket to the vehicle panel with the special
screw.
5D28040B
39. Insert the control unit bracket into the control
unit in the direction shown.
CONTROL UNIT
BRACKET
CONTROL
UNIT
5D28032B
38. Plug the back-up sensor harness 2-pin connector
into the vehicle 2-pin connector.
FRONT
BACK-UP
SENSOR
HARNESS
BACK-UP SENSOR
HARNESS 2-PIN
CONNECTOR
VEHICLE
2-PIN
CONNECTOR
41. Locate the drill mark on the right quarter panel
trim. Using a pushpin, pierce the center of the drill
mark.
5D28072B
PUSHPIN
UPPER RIGHT
QUARTER
DRILL
DRILL
Pierce
here.
RIGHT QUARTER
PANEL TRIM
5D28052B
CONTROL
UNIT
CONTROL
UNIT
BRACKET
VEHICLE
PANEL
PANEL
SPECIAL
SCREW
BACK-UP
SENSOR
HARNESS 14-PIN
CONNECTOR
FRONT
