12
INSTALLATION GUIDE
Installation of fireplace media and
glass panels:
This fireplace burner requires a layer of 1/4”
glass media to cover the burner tube, allowing
proper dissipation of the gas flow and prop
-
agation of the flame. This should be spread
evenly across and completely covering the
burner located inside of the square burner tray.
Carefully place the glass media over the top of
the burner and mesh media tray located inside
of the square burner tray, allowing glass to fill
void alongside tube and to cover over the top
of the tube with approximately 1/4” of the 1/4”
glass media.
The photo to the left shows the finished look
that should be achieved with the glass media
over the burner.
SAMPLE
Summary of Contents for Outdoor Linear 8 Burner System
Page 8: ...8 INSTALLATION GUIDE S A M P L E...
Page 9: ...9 INSTALLATION GUIDE S A M P L E...
Page 10: ...10 INSTALLATION GUIDE S A M P L E...
Page 21: ...21 NOTES S A M P L E...