Acucraft Outdoor Linear 8 Burner System, Installation & Operator'S Manual

Page: 6 / 23

6
INSTALLATION GUIDE
INSTALLATION SAFETY GUIDELINES
1. Installation and repair should be done by a qualified service person. The appliance should be inspected
before use and at least annually by a qualified service person. More frequent cleaning may be reuired as
necessary. It is imperative that the control compartment, burners and circulating air passageways of the
appliance be kept clean.
2. Carefully inspect for shipping damage. If any parts are damaged, call Acucraft at 763-263-3156.
3. Correct installation and proper placement of the unit and decorative media is crucial to safe performance of
the unit. See installation instructions for further information.
4. A listed manual gas shutoff device must be installed prior to the location of the fireplace.
TO INSTALL THE BURNER
The installation of this appliance must conform with local codes or, in the absence of local codes, with the Na-
tional Fuel Gas code, ANSI Z223.1/NFPA54, or the Natural Gas and Propane Installation Code, CSA B149.1.
Final assembly of this fireplace on site consists of the following main steps:
1. Positioning and securing of the fire pit
2. Connecting the gas valve and ignition system
3. Installing fireplace media and fireplace glass panes, if applicable
POSITIONING THE FIREPLACE
• The burner is designed to sit directly on non-combustible materials
• Identify the location of the fire pit
• Set the burner over the incoming gas line
Note:
The appliance should be positioned in a manner that planned gas line access is available with adequate
clearance for servicing from the top of the fire pit.
*Clearances must be in accordance with local installation codes and requirements of the gas supplier.*
SAMPLE