22
(4) Configure Settings
Touch the fourth circle, ‘Configure Settings’.
NOTE:
This may be completed later by going to ‘
Menu’ then select
‘Settings’ then ‘Date and time’.
By default, the date is set to ‘Auto set’. It will follow the
internet router time settings.
To manually adjust the date and time, slide the ‘Auto set’
switch to the left. Then follow steps 3-5.
Touch ‘Date and time’ to show adjustment dial. Scroll through
the day, month, year, hour and minute dial to set the correct
date and time. Touch ‘
’ to accept the new setting.
Touch ‘Time zone’ to select the city on the list of option
shown. Touch ‘Done’ to exit.
To set time format, slide the switch to the left for 12hr format.
Leave the switch to the right if 24hr format is required.
1
2
3
4
5
Summary of Contents for QTB-1000
Page 1: ...Installation and Commissioning Manual ...
Page 31: ...31 Notes ...
